Test For Resolution Devproblems

TEST FOR RESOLUTION Devproblems

It is very important to point out the project model that was carried out in this case, and that is, if specifying it from the beginning, it helps to delimit not only information but also to adequately and effectively and effectively meet the objectives. It took the analysis of the situation of efflorescence in construction materials and as evidence of the matter where we will be applying our knowledge seen above,.

For this occasion the project was based on solving a situation that can be common within the industry, this was based on the appearance of the so -called saltpeter in buildings built by Aztec concrete, causing discomfort for customers and in a way generating Losses for the company. For this it is necessary to use a fairly important concept such as efflorescence, also known as Salitre. To which the first question was raised, what factors contributed in its appearance?

Once being clear about the context of the situation and the different aspects that could be presented, it was necessary to carry out an investigation destined exclusively to the saltpeter, where its origin, its physical and chemical properties were sought and finally to find a way to counteract this problem. So far it seems that the resolution is very fluid, but it was not so, this due to the large amount of information to which you can have access quickly, it was necessary to delimit it in the best possible way and thus corroborating that it was according to what was sought.

Therefore, in this way it was as the first step was carried out and the first question for the problem was resolved.

Once solving the first part of the situation, the consequences of the appearance of these deterioration processes for the useful life of the constructions were to be sought?, In this way it was passed to the second part of the project, which once having the origin of the problem, began to be seen beyond this, investigating the consequences if it went unnoticed. For this, various cases of constructions were investigated that presented this same problem and nothing was done in this regard, where most of them coincided in a main effect, which was the deterioration and consumption of walls and columns, arriving at the did anything about it. Similarly, it began to investigate different sources of information, the way in which this problem could be counteracted and in its case it could be done having it once present once.

Finally, the prevention was reached, where the question was, how to avoid damage to future designs by interacting the chemistry of the environment and construction materials?; Already having a broader knowledge within what the saltpeter is, the causes that originate it and the way of being able to act once it begins to present in some building, it was time to design a plan in order to anticipate a problem like this. Which was much easier to design once having the entire situation in context and of course, conducting a deep investigation of the subject.

In conclusion, saltpeter is one of the main problems of constructions in Mexico, and not only generates an aesthetic damage but also with the passage of time it is a structural damage as well as it was seen, it can cause important structural damage that would bring damage that would harm the client so much, for having damage in their installation, and the construction company, because they are parameters and circumstances that must be taken into account when making a project to be built. The main causes of this problem are rainfall and humidity and, therefore, to prevent and treat efflorescence spots, it will be essential to protect surfaces against these factors, taking the alternatives presented during this project and preventing from the beginning from the beginning.