The Advantages Of Flex Neon Led

The advantages of Flex Neon LED

Introduction

The introduction of neon light is produced in tubes that contain neon and other gases that by means of an electrical reaction and a bright luminescence. The color of the light depends on the gas that fills the tube. The neon light is so called due to neon, a noble gas that gives an incarnate, very popular light, but other gases and chemicals are used to produce other colors, such as helium (yellow), carbon dioxide (white) and Mercury (blue). The LED is a light emitting diode (LED).

Developing

The United States began using neon in 1940. While it has been an essential part of the history of the lighting of the United States and Europe, neon has been slowly eliminated. In fact, some cities are prohibiting their use. In its manufacturing report specifies the great efficiency, duration, resistance and easy installation performance. In addition to them they have very good characteristics in which they are practically ‘unbreakable”, small, light, flexible and with a great recycling capacity. They comply with all quality regulations such as Rohs that guarantees that the luminaire is lead -free and mercury. 

They are practically the same visually. Its energy and cost savings are more than 70%, the durations of flexible neon LEDs are 10 times more durable than the tubes, thus being resistant to blows, vibrations, water and dust. They have a flexibility IP65 protection. You can fold up to a 2 cm diameter curve and has a useful life for a neon glass tube is 10.

000h. Flexible LED neon lights offer up to 50.000 hours of light. ADVANTAGES NEON FLEXEFICIENCY: Allows saving of more than 70%. Does not emit calories. Maintains color stability over time.

The outer cover manufactured with two layers of PVC improves the optical effect producing greater light efficiency. Decreases maintenance and decreases flexible chromatic errors: built with super flexible materials, allow to create 2 cm radios.  The crystal neon has an input voltage from 3 kV to 18KV. Flex LED On the other hand, it has 12v / 24v. This is an average CA voltage range, which makes a flexible neon safer than glass neon lights with LED air chamber. Flex neon applications cause color variations they offer are limited. Right now you can have 5 different colors (blue, green, yellow, red, white)

The lighting it provides is perfect to highlight the lines of the structures of any building, pavilions, restaurants, homes, etc. :- For interior or exterior use- structure lighting- Signaling- Creation of luminous labels- decoration-interiorism. How the Flex Neón LED strips are flexible strips that carry a series of LEDs inside a uniform lighting along the entire tube. These strips have replaced the traditional neon tubes used to make custom advertising posters. This loss of energy affects the useful life of the neon tube. 

LED strips have been calculated that they consume 70% less than consume a neon tube. This is because they do not need an starter, since they do not emit heat practically, transforming most energy into light. The strips are closed stagnantly, which makes them resistant to water, dust, already blows. Companies, decoration of public spaces and private spaces. adopted in February 2003 by the European Union. Fluorescent luminaire lamp is low -pressure mercury vapor discharge and is normally used for durable domestic or industrial lighting.

conclusion

With the passage of time the manufacturing and sale amounts increased causing pollution in the environment by the subject the materials used such as mercury, lead, etc. Interesting fact: in Argentina, the government distributed almost 30 million compact lamps throughout the country from 2008 to 2014. In 2010, the National Institute of Industrial Technology of that country estimated at 1.400 kilos The amount of mercury released to the environment by the different types of lamps. According to the regulation there is no ICT-BT on the installation of neon lighting. The manufacturer recommends installing thermal magneto switch